Ceramic block Porotherm Thermo developed by Wienerberger concern for the construction of energy efficient buildings. Block Porotherm Thermo has internal cavities which are filled with basalt insulation. The block produced by the latest technology, which combines a reliability and strength ceramics with good heat insulation properties of basalt wool.
isolation insulation properties of basalt directly dependent on its moisture content. The more moisture, the lower the thermal insulation, therefore, ceramic block Porotherm Thermo is further polished to obtain perfect geometric dimensions, which allow the installation of such units the thin-film adhesive with a horizontal seam thickness of 1 mm on masonry system Profi or DryFix, thereby exclude moisture mineral wool.
Process combination porous ceramics and basalt insulation possible to obtain unique indicators units thermal resistance Porotherm Thermo : when the thickness of the outer wall of 38 centimeters value of thermal resistance of walling R m2S is 5.0 ° / W, and when the thickness of the block 44 centimeters obtain the thermal resistance of the outer wall m2S R = 5.88 ° /Vt.
Thanks to the good diffusion capacity basalt insulation and ceramics, ceramic blocks Porotherm Thermo stabilize the humidity in the house for a favorable human level, and constantly maintain a healthy environment, and ceramics more perfectly accumulates and retains heat, smoothing sudden changes in temperature.
The main advantages of the wall of the ceramic blocks Porotherm < / span> Thermo :
1. Coefficient of thermal resistance R = 5,88 m2S / W, with wall thickness of 44 cm.
2. The wall does not require reinforcement and embedded parts - Saving money on expensive metals
3.. Better load distribution - the wall of the ceramic block is homogeneous, thus less risk of cracking.
4. The wall of the hollow block is easier than brick wall with insulation.
5. Workability -construction buildings occurs in one process, considerably faster than the construction of walls with subsequent warming.
6. Glue for assembly blocks included in the cost.
7. Ceramic blocks have good vapor permeability - walls "breathe", accumulate heat and smooth out sudden changes in ambient temperature, i.e. supported by a favorable microclimate for the premises.
8. Ceramic blocks - have a good load-bearing capacity, have the brand strength of the M75, so of them
9 can build load-bearing walls without secondary framing.. Ceramic blocks have a very good performance on sound insulation to 55dB.
10. Ceramic blocks - incombustible material 3 have refractoriness chasa
11.. Ceramic blocks - it is 100%natural product
.
