Keramobetonnye Porotherm webs are reinforced with prestressed reinforcement molded into the ceramic shell

is produced 3 types of webs:.

Jumper Porotherm < / em> 23.8 is designed for the device window and door openings in load-bearing walls. These webs have a cross section 23,8h65 mm, which corresponds to the height of ceramic blocks Porotherm

 Jumper Porotherm 23.8

Jumper Porotherm A-12 intended device window, door and technological openings a self-bearing and non-load bearing walls made of ceramic brick or large-block

 jumper Porotherm A12

Jumper Porotherm < / strong> Termo the device is designed for window, door and other openings in the self-bearing and non-bearing walls of the ceramic block or brick. The cross section 120h65 allows to integrate these jumpers in masonry or brickwork of large format ceramic blocks without additional structural elements. Mid jumpers Porotherm Termo laid expanded polystyrene insulation, which reduces heat loss in areas of windows or doorways

jumper Porotherm Termo

When installing jumpers over openings in width up to 2 meters to be installed mounting support and if the width of the opening of more than 2 meters, the mountings must be installed 2 pieces

 Installation support

Below is standard scheme stacking webs Porotherm A12 on the walls of the ceramic block Porotherm-44 EKO +, Porotherm-44 p + w, Porotherm-44 Klima, Porotherm-44 Termo, HELUZ 44 Family, HELUZ 44 Family 2 in 1, HELUZ 44 STI, HELUZ 44 Plus, Leier 44.

 mounting scheme of the wall blocks 44

Product added to wishlist
Product added to compare.