In the market of building technologies and materials in Ukraine, a new product for the construction of load-bearing exterior walls without "wet" tsiklov- Porotherm DryFix system, developed by the Austrian group Wienerberger. POROTHERM DRYFIX -. Laying system is polished hollow ceramic blocks on foamed polyurethane adhesive Masonry

Porotherm ceramic hollow blocks used in the system that have a common geometrical dimensions, due to additional grinding horizontal surfaces. To connect the hollow blocks are already subject to special cans with zhatym polyurethane glue. Glue is applied to the horizontal surface of the blocks with a conventional gun foam, and requires no additional preparation. It's very simple and very innovative connection system of hollow ceramic blocks.

BENEFITS POROTHERM DRYFIX

  • Save time work 2-fold, in relation to the traditional "wet" clutch technology due to its simplicity and work performed speed
  • The increase in the construction season -. the possibility of laying and in winter to . temperature -5 ° C
  • Maximum thermal protection - elimination of "thermal bridges" in the vertical and horizontal seams due seam thickness of 1 mm
  • <. strong> Clean and simple laying - no cooking cycle and applying masonry mortar, no tools for dilution, blending and mixing of the solution, the adhesive is applied using a conventional gun foam
  • Savings <. / strong> on the materials and resources - do not need cement, sand, water, electric power is not needed for the preparation of masonry . Mixture
  • Savings on storage cost -not require dry storage cement
  • High strength walls -. Masonry made on POROTHERM DRYFIX system instantly gets declared parameters of strength, a few hours can be loaded
  • Fast and economical finishing wall -. clean the wall, can be plastered immediately after the masonry work because do not need time to evaporate the water from the walls. The thickness of the plaster minimum due to different block geometries.
  • Ability to create walls of different thicknesses due to the large range blocks.

Similarly, and easy as never before! system POROTHERM DRYFIX-a technology for those who appreciate the speed and quality of work at the construction site!

Thus, the "dry" masonry wall system POROTHERM DRYFIX allows you to build a wall in 2 times faster than traditional masonry from POROTHERM blocks and 5 times faster than masonry walls of bricks! The ability to carry out masonry work in winter at negative temperatures down to -5 ° C. The possibility of loading the wall a few hours after their construction because no mortar, which is gaining strength for 28 days and at low temperatures -garazdo longer! It should be less unskilled workers due to lack cooking cycle masonry mixture. The ability to produce finishing work immediately after the erection of walls with lower cost materials, as walls are ideal geometry and contain no moisture.

All of this significantly reduces the commissioning dates of buildings, and therefore reduce the overhead costs associated with the construction cycle software -ohrana construction site, payment of temporary power supply circuits, time-based compensation of employees, and so on. e.

and the most important economic benefit is the opportunity garazdo faster start operation of the building, which means faster start profiting!

Product added to wishlist
Product added to compare.