When buying even the most expensive high-quality clinker You should understand that the appearance of the house and the durability of the facade also depends on the qualification mason and compliance masonry technology.
Basic rules facing home clinker :
CORRECT SKLADIROVANIE- trays with bricks must be stored at the construction site dry paved, wherein there is no threat of contamination solution brick, bitumen, or other substances that lead to persistent, removable hard or even fatal stains, printed pallets should cover the protective film.
RIGHT-sOLUTION for each kind of bricks, depending on its water absorption to be applied corresponding mortar. There are several types of bricks in their ability to absorb moisture: clinker with low vlagopogloschaemostyu less than 3%, with an average water absorption of 4-8%and finishing bricks with high moisture pickup of more than 10%. These types of masonry bricks should be used solutions which have different time binding. It is best to apply the factory ready masonry mixtures which have a specific color, are easy to use (it is sufficient to add only water) and are safe, do not contain lime and slag. These ready-made masonry mortars for different types of facing brick production CRH, Quick-Mix, Baumit well established among professional masons and builders. When deciding on the preparation of the solution on its own, it should be understood that to obtain high-quality monochrome seam will be very difficult, as the builders will prepare masonry mixture of several components and a slight change in the proportions of these substances will lead to a negative result.
RIGHT MASONRY -oblitsovochny brick is not recommended to lay "under the rod". On some parts of the facade should be used bricks from the produced one batch. Brick is a natural product, and bricks from different batches can vary in color. In the process of masonry mix bricks from different trays, a minimum of three. Mixing of several pallets of bricks will provide a harmonious effect of mutual penetration of colors. Do not make laying during rain, frost and high temperatures above 25 degrees. The finished wall must be protected from moisture and direct sunlight for at least 14 days. Only corpulent facing bricks should be used for the cap and the chimney.
RIGHT REINFORCEMENT-for connection of bricks with the main wall of the house should be applied only in stainless steel anchors that do not corrode and eventually does not lose its bearing capacity. The use of embedded ferrous metal may cause rust on the facade, a change suture color and complete destruction of the connection with the main wall, cracking and subsidence
RIGHT sEAM -Recommended perform rasshivku clutch and using the same solution, designed for simultaneously laying and performing seams (e.g., masonry mortars Quick-mix VK, VM, VZ). In the case of laying with subsequent grouting suture solution should be left void depth of 10-12 mm, for further filling grout. The shape of the finished seam to be filled as much as possible at the edges with concavity towards the middle. In case of contact on the bricks to remove contamination immediately using a stiff brush, rinse with water residues.
