Make terrace of ceramic tiles Keracerm Osmose, Agrob Buchtal can quickly without heavy concrete work. There are several common ways to terraces device operated roofing, paving around the house without the production of the concrete base.

The first method is placing terraced plates is a dry laying patio boards Keracerm Osmose, Agrob Buchtal on the drain base.

 Laying on the gravel patio boards

must first perform a preparation base for final coating of ceramic plates Keracerm Osmose, Agrob Buchtal.

In the first stage removed the upper layer of soil, then the pit is filled with gravel fractions 5-20 layered tamper. Macadam laid on the separation layer of geotextile, which prevents mixing of compacted crushed stone layer with a fine leveling layer of gravel. Geoteksil prevents the reduction of bearing capacity at the drain surface of the base, which is caused by decompression coarse granular layer of gravel of the gravel settling fine particles under the influence of mechanical stress and flow of shower water or melted snow. Top spacer layer backfilled planarization layer about 5 cm of fine gravel, which is laid on a ceramic plate terraced

 The base for laying patio boards

depending on the kind of load will act on the pad paving terraced slabs calculated thickness of the crushed stone layer, and geotextiles density

. for pedestrian areas sufficient thickness of compacted crushed stone 10 cm and take geotextile Typar SF 20 if the site is planned to race cars, the thickness of the gravel must be at least 20 cm and apply geotextile Typar SF 32. For areas of paving, which is supposed to check trucks, thickness of compacted crushed stone must be at less than 40 cm, and applying geotextile Typar SF 40

.

The seam between the slabs of 3 mm and allowed to fill it coarse sand

Can the seams between the boards to do more and to fill them with decorative gravel of different mineral species.

Dry laying method terraced plates Keracerm Osmose, Agrob Buchtal advantageous to drain the base material, is a technologically cheaper and faster than the apparatus of the concrete base. Gravel and crushed stone pass water into the soil surface terraces are formed puddles, not stagnant mud, all the water leaves between tile joints in soil

stacking the plates with the wide seam

The second method of laying is a terraced laying ceramic tiles on plastic supports. This method of stacking plates terraced often used for a device operated roofs, terraces, raised floor where there is already a stable solid base. Supports may be fixed or adjustable in height

 Non-adjustable supports for terrace

Unregulated support used where there is a ready-made flat solid ground and there is no need to raise the top of the terrace to a higher level

 Adjustable foot for terrace slabs < / p>

Adjustable feet for terraced plates are used where necessary to align the top of the terrace, where the base has a large elevation changes. Adjustable feet allow to raise the patio boards to a height of 30 centimeters, and if we apply the special extensions to the supports, it is possible to raise the terrace or raised floor up to 66 centimeters above the ground.

 Stacking plates on

Product added to wishlist
Product added to compare.