Ceramic polished block Porotherm-44 T Dryfix, intended for construction of exterior bearing walls of passive houses without additional insulation.
The system uses a ceramic hollow blocks Porotherm-44T DryFix, which are filled with mineral insulant internal cavity. To connect the hollow blocks are already subject to special cans with zhatym polyurethane glue. Glue is applied to the horizontal surface of the blocks with a conventional gun foam, and requires no additional preparation. This is a very simple and completely innovative system compounds hollow ceramic blocks.
Thanks to the good diffusion capacity, ceramic blocks stabilize the humidity in the house on favorable to the human level and constantly maintain a healthy environment. Ceramic blocks excellent accumulate and retain heat by smoothing abrupt changes in temperature.
BENEFITS POROTHERM DRYFIX
- Speed masonry 2-fold higher, than with the traditional "wet" technology of masonry due to the ease and speed of work performed .
- The increase in the construction season - the possibility of laying and in the winter to a temperature of -5 ° C
- Maximum thermal protection . - R = 5,84 m2 * K / W and elimination of "thermal bridges" in the vertical and horizontal seams
- Clean and simple dry masonry -. offline cooking cycle and applying masonry mortar, the lack of tools for dilution, blending and mixing of the solution, the adhesive is applied with a conventional gun foam
- Save on materials and resources -. not need cement, sand, water, no electricity costs for the preparation of masonry mixture, assembly adhesive in the value of units
- High strength wall ! - masonry, made of POROTHERM DRYFIX system instantly gets declared parameters of strength, a few hours can be loaded
- Fast and economical finishing wall -. clean the wall, can be plastered immediately after the execution of masonry works because do not need time to evaporate the water from the walls. Minimal thickness of the plaster due to the different geometry of the blocks.
