ceramic hollow block Porotherm-44 for construction of exterior bearing walls without additional insulation.
Thanks to the good diffusion capacity, ceramic blocks stabilize the humidity in the house on favorable to the human level and constantly maintain a healthy environment. Ceramic blocks excellent accumulate and retain heat,
However, the wall of the ceramic hollow blocks 2 times easier, thus smoothing out sudden changes in temperature. load on the foundation is 2 times lower. Mounts in 5 times faster, does not require highly skilled installers. A huge advantage - the uniformity of the wall, the entire wall works the same way, no stresses arise - there are no cracks. The durability of the walls - a few centuries
Blocks Porotherm-44 P + W withstand the load of 100 kg / cm 2 , so one can build a house in 5-6 floors without additional Laying nets! that reduces the final cost of the house.
when erecting the walls of these blocks obtain smaller wall thickness with better insulating properties (this is an important factor in terms of energy prices constant rate), the masonry mortar consumption 4-fold less than conventional masonry of ordinary brick, but the work is much cheaper. Choosing the material for the walls is necessary to consider not only the cost of the material itself, but also the cost of installation and the cost of additional materials for the installation. The cost of work 1m 2 walls of large-POROTHERM blocks 3 times cheaper than the cost of masonry walls of ordinary brick!
heat conductivity in ceramic blocks stable throughout the year, and the indicators of insulation deteriorates with a sharp increase in humidity and temperature difference (increased humidity heater 1%deteriorates the insulation 15%).
