Description
ceramic hollow block Porotherm-44K has a higher thermal coefficient of resistance by increasing the number of internal air voids.
Thanks to the good diffusion capacity, ceramic blocks stabilize the humidity in the house on favorable to the human level and constantly maintain a healthy environment. Ceramic blocks excellent accumulate and retain heat by smoothing abrupt changes in temperature.
Blocks Porotherm-44 To withstand the load of 100 kg / cm2, so one can build houses 5-6 floors without additional reinforcement, which reduces the final value of the house.
with the construction of the walls of these blocks get smaller wall thickness with the best thermal insulation properties (this is an important factor in terms of energy prices continued growth). Choosing the material for the walls is necessary to consider not only the cost of the material itself, but also the cost of installation and the cost of additional materials for the installation. Cost of works 1m2 wall of the large-POROTHERM blocks 3 times cheaper than the cost of masonry walls of ordinary brick!
heat conductivity in ceramic blocks stable throughout the year, and the indicators of insulation deteriorates with an increase in humidity and sudden changes in temperature (increase humidity heater 1%deteriorates the insulation 15%).
Product Details
- Format, mm
- 440х248х238
- Strength grade
- М 100
- Weight, kg
- 19,4
- Quantity in sq.meter
- 16 шт
- The equivalent of a conventional brick
- 13,3
- Solution consumption per m2
- 30 л
- Frost resistance
- F25
- Water absorption
- 15%
- Soundproofing Rw, dB
- 56
- Heat transfer resistance, R (m2C/W)
- 4,29
- Thermal resistance coefficient, λ (W/m²K)
- 0,12
- Quantity per pallet
- 60 шт
You might also like