Keramobetonnye Porotherm webs are reinforced with prestressed reinforcement molded into the ceramic shell
is produced 3 types of webs:.
Jumper Porotherm < / em> 23.8 is designed for the device window and door openings in load-bearing walls. These webs have a cross section 23,8h65 mm, which corresponds to the height of ceramic blocks Porotherm
Jumper Porotherm A-12 intended device window, door and technological openings a self-bearing and non-load bearing walls made of ceramic brick or large-block
Jumper Porotherm < / strong> Termo the device is designed for window, door and other openings in the self-bearing and non-bearing walls of the ceramic block or brick. The cross section 120h65 allows to integrate these jumpers in masonry or brickwork of large format ceramic blocks without additional structural elements. Mid jumpers Porotherm Termo laid expanded polystyrene insulation, which reduces heat loss in areas of windows or doorways
When installing jumpers over openings in width up to 2 meters to be installed mounting support and if the width of the opening of more than 2 meters, the mountings must be installed 2 pieces
Below is standard scheme stacking webs Porotherm A12 on the walls of the ceramic block Porotherm-44 EKO +, Porotherm-44 p + w, Porotherm-44 Klima, Porotherm-44 Termo, HELUZ 44 Family, HELUZ 44 Family 2 in 1, HELUZ 44 STI, HELUZ 44 Plus, Leier 44.
