It is very uncomfortable when after a heavy rain in the land tracks are puddles, you yourself are trying to take away the accumulated water from the site, dig grooves, pits, are pointing to the water, but not always, your work is justified. What to do in this situation, where the accumulated water do?
But there is a solution, it is necessary to make the surface water drainage system that will collect and divert rainwater and melt water.
There are two types of drainage systems: linear and point, they can be installed either separately or combined
The linear drainage system. It includes closed gratings and trash boxes trays combined into a single network, which is designed to collect water and its subsequent discharge into storm sewers.
Drain tray may be concrete, polymer concrete and plastic.
Trash boxes -. It is the capacity required for retention of sand, leaves and other litter rendered water flow
Plastic trays convenient to install, are lightweight, they can even carry a passenger car. Plastic trays are easy to fit together with each other and with the trash box. Plastic trays have built-in outlets to connect the drain or sewer pipe. Plastic trays are designed to operate with a load up to 25 tons, this tray is to be installed on the crushed stone foundation 10-15 centimeters thick, and concrete side. Cover such linear drainage is necessary only iron reschotkami. If the drainage line is located in the pedestrian zone, where there is a large operational load, the trays can be closed galvanized metal grilles.
For the correct selection of the depth of the trays is necessary to consider the catchment area, the surface of the slope and the material surface to which it is planned to collect and discharge of rainwater and meltwater . For large areas with difficult terrain it is necessary to perform the hydraulic calculation, which takes into account all the operational factors , with the need to take into account the type of soil, the amount of snowmelt and rainwater load.
Point drainage is used for local collection of rainwater and meltwater, it has less bandwidth, but prevents flooding of basements and prolongs the life of the foundation. Water accept plastic gullies which are installed under the roof gutters, in the pits at the door, under watering taps and other places that require water harvesting. The water from the inlets of the tubes is directed into storm sewers.
The question of withdrawal of melt and rain water, usually arises in the course of construction, but still a drainage system must be designed still under development master plan area.
If you want to have around your home there was puddles, mud and rubbish, that on your site you need to perform a drainage system.
a properly designed and well-made surface drainage -. is the purity, beauty and comfort to your site
Our professional will design a system of surface and drainage drainage, will pick up the necessary elements, as well as , efficiently assemble the entire system.
