Finish base at home - it is an important task in the architectural and technological aspects, as the choice of material for finishing the base depends not only on the appearance of the house, but also the reliability of the node stena- foundation
. Materials for finishing the cap must be particularly resistant to external factors, such as snow, rain, frost. The most negative impact on the plinth has snow. In snowy winters are not always possible to completely clean the socket on the snow drifts, temperature near the wall a little higher than the air temperature and sun exposure, especially in clear weather, leads to snow thawing. Melt water infiltrates the material from which the cap is made, and the decrease of temperature at night leads to crystallization of water in the pores of the wall. The ice expands and damages the internal structure of the wall. Such freeze-thaw cycles per day can be more than one. Therefore, base trim material must withstand such an impact to protect the bearing wall from destruction
. There are a number of reliable materials for decoration and protection cap : solid brick clinker brick, clinker tiles, natural stone slabs
. The natural stone and solid brick clinker pretty heavy stuff and should be mounted on foundation, and ceramic tiles glue on the wall without additional reinforcement of the foundation
. The main advantage of using the basement tiles compared with natural stone - is the cost. The cost of real stone finish exceeds the cost of finishing the basement floors several times. With plinth tiles can achieve the simulation of any kind of stone, including exotic and very expensive
in the clinker-STYLE cabin contains a large number of ceramic tiles in the form of brick manufacturers such as, CRH, Muhr, Feldhaus, Roben, VandeMoortel, S. Anselmo, Vanersanden, Stroher.
< span style = "font-size: 10pt;"> Company Stroher except tiles under brick produces a special plinth tile Cerabig size 300h150 mm and 600h300 mm, which combines the appearance of natural stone, its reliability with ease of installation of ceramic tiles
plinth tiles much easier to natural stone, therefore, its glue directly on the base without the use of embedded parts and anchor
.
The only condition for finishing the base ceramic tiles is the use of highly elastic frost-resistant glue and vodonepron itsaemoy grout.
The presence of angular elements plinth tile allows you to fully simulate the look of natural stone.
