ceramic hollow block Porotherm-44 EKO +, for construction of exterior bearing walls without additional insulation.
Thanks to the good diffusion capacity, ceramic blocks stabilize the humidity in the house on favorable to the human level and constantly maintain a healthy environment. Ceramic blocks excellent accumulate and retain heat by smoothing abrupt changes in temperature.
Blocks Porotherm-44 EKO + withstand load of 100 kg / cm2, so one can build houses 5-6 floors without additional Laying nets, thus reducing end value of the house.
with the construction of the walls of these blocks get smaller wall thickness with the best thermal insulation properties is a significant factor in the conditions of constant growth in energy prices, with the masonry mortar consumption is 4 times less than a conventional masonry of ordinary brick, and the work is much cheaper.
thermal conductivity indicators in ceramic blocks stable year-round, and the rate of insulation deteriorates with increasing humidity, sudden changes of temperature (increasing humidity heater 1%deteriorates the insulation 15%) .
Thermal insulating properties of the blocks 44 Porotherm-EKO + 30%higher than that provided by building codes Ukraine. Saving energonasiteley became really noticeable!
- Format, mm
- Марка прочности
- М 100
- Weight, kg
- 17 кг
- Quantity in sq.meter
- 16 шт
- Frost resistance
- Heat transfer resistance, R (m2C/W)
- 4,35 м2К/Вт
- Water absorption
- Solution consumption per m2
- 30 л
- 56 dB
- Quantity per pallet
- 60 шт
- The equivalent of a conventional brick
- Thermal resistance coefficient, λ (W/m²K)
You might also like