Description
ceramic hollow block Porotherm-25 E3 for construction of exterior load-bearing walls with an additional insulation and interior load bearing walls. Blocks Poroterm-25 used in the cast-frame construction as filler concrete frame, which is insulated with insulation basalt subsequent plastering. Block-25 Poroterm economically advantageous to use for the construction of three-layer outer wall: + unit heater + facing brick. These blocks are used for the construction of internal load-bearing walls of buildings.
Thanks to the good diffusion capacity, ceramic blocks stabilize the humidity in the house on favorable to the human level and constantly maintain a healthy environment. Ceramic blocks excellent accumulate and retain heat by smoothing abrupt changes in temperature.
The wall of the ceramic hollow blocks 2 times easier, thus load on the foundation is 2 times lower. Mounts in 5 times faster, does not require highly skilled installers. heat conductivity in the ceramic blocks stable year-round, and the rate of insulation deteriorates with increasing moisture content and a sharp temperature drop (moisture raising heater 1%deteriorates the insulation 15%).
Product Details
- Format, mm
- 250х373х238
- Strength grade
- М 150
- Weight, kg
- 13,0
- Quantity in sq.meter
- 11 шт
- The equivalent of a conventional brick
- 11,44
- Solution consumption per m2
- 16 л
- Frost resistance
- F25
- Water absorption
- 15%
- Soundproofing Rw, dB
- 50
- Heat transfer resistance, R (m2C/W)
- 1,07 м2/КВт
- Thermal resistance coefficient, λ (W/m²K)
- 0,14
- Quantity per pallet
- 72 шт
You might also like