Ceramic blocks Porotherm-25, Porotherm-30 for load-bearing walls with insulation

For the construction of the external load-bearing walls with extra insulation and interior bearing walls, Wienerberger produces blocks Porotherm-25 p + w, Porotherm-25 E3, Porotherm-30, Porotherm-25 Profi, Porotherm-25 DryFix, Porotherm-30 Profi, porotherm-30 DryFix

These units do not have sufficient thermal insulating ability to be used in single-layer enclosing wall structures, so they are used in two-layer exterior walls in any climatic zone. In this exterior wall insulating characteristics determined by the thickness of insulation.

Using Porotherm-unit 25 or 30 for Porotherm-bearing internal walls significantly reduces the construction time of the building, the walls have better soundproofing.

The monolithic frame construction is rational to use ceramic blocks thickness of 25 or 30 centimeters, intended for double-layer walls, because the iron-concrete supporting framework requires further insulate and use thick blocks 38 and 44 centimeters reduces the internal area of ​​the premises.

With good diffusing capacity, ceramic blocks stabilize the humidity in the building at a favorable level for humans and constantly maintain a healthy environment. Ceramic blocks excellent accumulate and retain heat by smoothing abrupt changes in temperature.

The wall of the ceramic hollow blocks 2 times lighter than a wall made of brick, then the load on the foundation is 2 times lower. Mounts in 5 times faster, does not require highly skilled installers. Durability of such walls - several centuries

Compared with concrete blocks:

1. Ceramic blocks are M100-150 strength, may be used for load-bearing walls!.
2. The ceramic blocks have significantly better sound insulation
3. The ceramic blocks have a lower water absorption, and thus a better resistance to frost
4. The ceramic blocks have a greater fire resistance - up to 4 hours
5. Ceramic blocks POROTHERM - a 100%natural product
6. POROTHERM blocks have ISO 9001