Tray concrete with iron bars with a...
Tray concrete with iron bars with a...
Tray concrete with iron bars with a...

Tray concrete with iron bars with a branch DN160, H305 MAX

Tray concrete (fiber concrete) with a drainage grating and slit iron reinforcing steel nozzles with vertical outlet diameter of 110 mm (set) DN 160, H 305 - Series MAX

.
0430009
2,647.37 грн

(2,647.37 грн 1 шт.)

Description

Trays of fiber-reinforced extra strong, impact-resistant reinforced Series MAX - is a series of trays, reinforced galvanized steel nozzles and equipped with cast-iron grating load class D400 = 40t, 60t = E600, F900 = 90t. Complete sets of high-trays are widely used in the construction and reconstruction of streets, squares, parks and recreation, railway stations, airports, and gutters enhanced series are equipped with a gas station, service station trucks, warehouses and terminals, industrial areas and highways, bus and truck park where high mechanical and dynamic loads, as well as places with heavy traffic. Trays enhanced series MAX reserved nozzles of galvanized steel, which molded into the side of the tray and are conjugate with embedded anchors reinforcing tray. The design of anchors is provided the possibility of replacing a fixing bolt and a nut, which makes the system maintainability and durable, well-designed system grating attachment to the tray avoids destruction of the channel walls under the action of large surface loads, made trays amplified series of fiber concrete, polymer concrete and plastic, and also with different hydraulic cross sections (DN 110, 160, 200, 300 and 500) and heights (h from 130 to 600). There are situations when it is impossible to create the desired slope by a surface, but a linear surface drainage must be reliably function for this in a stronger series MAX of fiber-reinforced concrete, provided trays series with different heights that when you install allows you to create so-called "cascade" , ie elevation, via which the water through the trash box will go into storm sewers. This tray is manufactured from fiber concrete, a load class E600 = 60 m, supplied standard set: tray with reinforcing nozzles, two lattice cast iron 500 mm long slot (HF-50 iron mark), fasteners (bolts and nuts). To ensure a tight seal between the trays using a one-component sealant based on MS-polymers. All products Standartpark certified according to international quality control system.

Accessibility MAX series DN160.

1. made to order any height from 190 to 305 mm with a difference in height between adjacent trays from 5 mm.

2. Is made with an internal bias from 5 to 50 mm.

3. Can be made with vertical drainage, the ability to connect to a pipe diameter of 110 mm (the product reference to be added at the end ........ 09).

Product Details

Format, mm
1000х245х305
Weight, kg
107,4
Length, m
1,0
Load class
E 600
Hydraulic cross-section
DN160

You might also like

Product added to wishlist
Product added to compare.