Tray concrete reinforced with iron...
Tray concrete reinforced with iron...

Tray concrete reinforced with iron bars DN300, H410 MAX

Tray concrete (fiber concrete) with lattice reinforced cast iron drainage slit and reinforcing steel nozzles (optional) kl.nagruzki F, DN 300, H 410 - Series MAX


11,890.00 грн

(11,890.00 грн за 1 шт)


Trays of fiber-reinforced extra strong, impact-resistant reinforced Series MAX - is a series of trays, reinforced galvanized steel nozzles and equipped with cast-iron grating load class D400 = 40t, 60t = E600, F900 = 90t. Complete sets of high-trays are widely used in the construction and reconstruction of streets, squares, parks and recreation, railway stations, airports, and gutters enhanced series are equipped with a gas station, service station trucks, warehouses and terminals, industrial areas and highways, bus and truck park where high mechanical and dynamic loads, as well as places with heavy traffic. Trays enhanced series MAX reserved nozzles of galvanized steel, which molded into the side of the tray and are conjugate with embedded anchors reinforcing tray. The design of anchors is provided the possibility of replacing a fixing bolt and a nut, which makes the system maintainability and durable, well-designed system grating attachment to the tray avoids destruction of the channel walls under the action of large surface loads, made trays amplified series of fiber concrete, polymer concrete and plastic, and also with different hydraulic cross sections (DN 110, 160, 200, 300 and 500) and heights (h from 130 to 600). There are situations when it is impossible to create the desired slope by a surface, but a linear surface drainage must be reliably function for this in a stronger series MAX of fiber-reinforced concrete, provided trays series with different heights that when you install allows you to create so-called "cascade" , ie elevation, via which the water through the trash box will go into storm sewers. This tray is made of fiber-reinforced concrete, has a maximum load class F 900 = 90 m, supplied standard set: tray with reinforcing nozzles, two lattice iron reinforced slit length of 500 mm (HF-50 iron mark), fasteners (bolts and nuts). To ensure a tight seal between the trays using a one-component sealant based on MS-polymers. All products Standartpark certified according to international quality control system.

Accessibility MAX Series DN 300.

1. made to order any height from 265 to 410 mm with a difference of heights between adjacent trays from 5 mm.

2. Is made with an internal bias from 5 to 50 mm.

3. Can be made with vertical drainage, the ability to connect to a pipe diameter of 110-200 mm (the article to the end product is added ........ 09).

Product Details

Format, mm
Weight, kg
Length, m
Load class
F 900
Hydraulic cross-section

You might also like

Product added to wishlist
Product added to compare.