A single-layer wall - the oldest in the history of construction. Ceramic single-layer wall is very solid, durability designed for many centuries. The outer walls of the hollow ceramic Poroterm blocks does not require additional insulation, t. K. Characterized by high thermal insulation properties.
When erecting the walls of these blocks obtain smaller wall thickness with better insulating properties (this is an important factor in continuous growth energy prices), while the consumption of masonry mortar is 4 times less than a conventional masonry of ordinary brick, but the work is much cheaper. Choosing the material for the walls is necessary to consider not only the cost of the material itself, but also the cost of installation and the cost of additional materials for the installation. Cost of works 1m2 wall of the large-POROTHERM blocks 3 times cheaper than the cost of masonry walls of ordinary brick!
As a result, the construction of walls, you can save around 20%!
Thanks to the good diffusion capacity ceramic blocks, stabilizes the humidity, the walls "breathe", that is to maintain a healthy indoor climate. Ceramic blocks accumulate heat and smooth out sudden changes in external temperature to ensure the comfort of living. And most importantly, in the house of such material, you'll constantly save on energy - on heating in winter and in summer for air conditioning!
The main advantages of the walls of ceramic hollow blocks:
- Better load balancing - the wall of the ceramic block is homogeneous, thus less risk of cracking.
- The wall of the ceramic blocks does not require reinforcement and embedded parts, therefore, savings in expensive metal.
- The wall of the hollow blocks POROTHERM lighter than brick wall with insulation :
- 1m2 walls POROTHERM -38 block weighs 272 kg (16 kg x 17 pcs.),
- mortar - 25 kg per 1 m2,
- TOTAL - 297 kg
- 1 m2 wall in 2 bricks weighs: 102 pcs. kg x 3.5 = 357 kg,
- mortar - 102 kg (per 1 kg of brick-r-ra),
- insulation - 12 kg,
< li> TOTAL - 471 kg
- smaller wall thickness with the best indicators of teplosberezheniyu:
at a thickness of 380 mm unit of thermal resistance ratio R is 2.86 m2S /. . W - Manufacturability - stacked blocks faster, do not need high qualification of workers
masonry mortar need 4 times less than for the walls of ordinary brick - The ceramic blocks have.. good vapor permeability - the walls "breathe", ie, supported indoor climate.
- Ceramic blocks accumulate heat and smooth out sudden changes in ambient temperature, thus provides a comfortable indoor climate.
- thermal conductivity of ceramic blocks in stable year-round, and the rate of foam deteriorate with increased humidity and a sharp temperature drop (moisture increase of 1%of foam insulation degrades by 15%). Thermal insulation performance of concrete blocks are indicated for dry blocks, ie, these theoretical figures and the ceramic blocks are tested at a relative humidity of 60-70%(ISO 9001 is a requirement), and therefore insulation performance POROTERM units are operational, i.e., . Real
- Ceramic blocks have a strength is 5 times greater than the aerated concrete blocks (10-15 MPa - ceramic -gazobetonnye 2.5-3 MPa), so that ceramic blocks can construct bearing walls, and of aerated concrete blocks -. can not
- The ceramic blocks have very good adhesion, so the walls of ceramic blocks shtukaturyatsya without reinforcing mesh, and for further finishing tiles do not require additional training sten- tile is laid directly on the wall, thus reduced materials and salary costs work.
- The ceramic blocks have a very good performance of sound insulation up to 55dB.
- The ceramic blocks have a low moisture absorption and therefore a high frost resistance.
- Ceramic blocks - incombustible material have refractoriness 4 chasa
- Ceramic blocks POROTHERM -. 100%natural product
- blocks POROTHERM have ISO 9001
