Ronson Brick Halden clinker tiles for ventilated facades are used for cladding buildings in ventilated facade systems. Clinker tile Ronson Brick Halden for ventilated facade is produced in the format 287*85 mm. You can buy Ronson Brick Halden clinker tiles for vent facade by selecting the colour of the tile and specify the required quantity in pieces
Ronson Brick Halden clinker tiles have special grooves at the ends and are mounted on horizontal profiles without self-tapping screws. The load-bearing structure of the ventilated facade consists of vertical and horizontal load-bearing profiles, which can be made of aluminium or galvanised steel. The supporting profiles are fixed to the façade on metal supporting brackets. By selecting brackets of different lengths, the thickness of the supporting frame can be adjusted, which allows for the insertion of insulation of different thicknesses. The supporting structure is calculated for static load from the weight of materials and dynamic wind load. The weight of Ronson Brick Halden clinker tiles for ventfasade is 37 kg per m2, which makes it possible to reconstruct buildings without reinforcing the foundation. To calculate the amount of Ronson tiles for ventfasade you need to divide the area of the house by the size of the tiles in metres, the resulting amount is rounded up and 5% is added for trimming. Our engineers can calculate the load-bearing system and the quantity of Ronson Halden tiles for the ventilated façade system of your house and carry out the installation supervision
The new system of dry brickwork consists in the fact that instead of full-body facing bricks, which are laid on cement mortar, special clinker tiles of brick format with grooves are used, which are mounted on special rails fixed to the wall of the house
