The separator device zhirov- mechanical purification of waste waters from non-emulsified fat and from suspended substances, which differ in small or large hydraulic size and are separated together with fats from water under the influence of gravitational forces. Separator fat JPR produced two kinds of performance -0.5 liters / sec and 1.5 l / s, are set for wastewater treatment in domestic conditions under the sink in the kitchen (apartments, bars, restaurants, schools, etc). This JPR separator 501 has a capacity of 0.5 l / s. PRINCIPLE OF SEPARATOR FATS:
Device fat separator is a polyethylene hermetic container defined therein by partitions to slow the flow velocity and its cooling. Under cooling change from fats emulsified in the emulsified state and float to the surface of the water surface in the separator (so-called volume storage of fat). Of this amount, in consequence, the fat is removed. When properly carried out preliminary measurements and proper maintenance, according to the manufacturer's instructions, ensures effective removal of grease and dirt at the level of 95%. The separator may be used as an independent equipment for local treatment of effluents prior to discharge into the general sewage system or as part of complex treatment facilities. Fat separators are made of high density polyethylene by rotational molding technology according to standard PN EN 1825-2: 2002 (U) corresponds to the international ISO 9001 certification
Main Components:. - a separation chamber - ventilation.
