fat separator sump and a pipe for...

fat separator sump and a pipe for emptying STOZ.

fat separator with a sump and a pipe for emptying STOZ 1.5 (throughput 1.5 l / s).

41,615.00 грн

(41,615.00 грн 1 шт.)


The separator device zhirov- mechanical purification of waste waters from non-emulsified fat and from suspended substances, which differ in small or large hydraulic size and are separated together with fats from water under the influence of gravitational forces. STOZ fat separator (somewhere ST-fat separator; O-settler; Z-nipple discharge) are produced of various capacities (from 1.5 to 20 l / s), are set for the purification of effluents from the bars, restaurants, companies and the food industry etc. PRINCIPLE oF sEPARATOR FATS:

fat separator apparatus is an airtight plastic container defined therein by partitions to slow the flow velocity and its cooling. Under cooling change from fats emulsified in the emulsified state and float to the surface of the water surface in the separator (so-called volume storage of fat). Of this amount, in consequence, the fat is removed. The condition for an efficient purification of effluents containing such contaminants is the application tool kit consisting of a preliminary sedimentation tank and the separator. In this configuration the cleaning process occurs in two phases. In the first phase wastewater treatment process fall within the preliminary settling tank, where the flow rate of deceleration and sedimentation, the solid particles are separated from the liquid. The next phase of treatment - is the process of flotation of particles of fatty substances and their accumulation on the surface of the water. This two-phase cleaning process provided properly conducted pre-measurements and proper maintenance, according to the manufacturer's instructions, ensures effective removal of grease and dirt at the level of 95%. Nozzle mounted in the bottom of the separator, which greatly facilitates its cleaning and maintenance. The separator may be used as an independent equipment for local treatment of effluents prior to discharge into the general sewage system or as part of complex treatment facilities. Fat separators are made of high density polyethylene by rotational molding technology according to standard PN EN 1825-2: 2002 (U) corresponds to the international quality certificate ISO 9001. Nozzle mounted in the bottom of the separator, greatly facilitates its cleaning and maintenance. Products have the following technical properties:

* good resistance to shock; * a magnificent view of the inner and outer surfaces; * UV resistance; * High corrosion durability. Basic equipment: - sump - a separation chamber - empty pipe - ventilation. Optional: extension; iron hatches that can withstand up to 15 tons; system of visual and audible alarm.

Product Details

Output, l/s
от 1,5 до 20

You might also like

Product added to wishlist
Product added to compare.