Septic tanks aerobic post-treatment...
Septic tanks aerobic post-treatment...
Septic tanks aerobic post-treatment...

Septic tanks aerobic post-treatment "SAD" polyethylene.

Septic aerobic post-treatment (biofilter) housekeeping, domestic waste water "SAD" 2 cbm., Made from polyethylene.

43,050.00 грн

(43,050.00 грн 1 шт.)


Preliminary sewage treatment always takes place in the septic tank , and the post-treatment has two options: 1 in the biofilter "SAD" and 2. . in the filtration drainage system. This septic tank (biofilter) "MAP" relates to a first embodiment aftertreatment housekeeping, domestic wastewater, sewage treatment plants circuit provides a wastewater treatment to indicators to dump effluent the filter pit, trench, to the relief, etc. and is used in places where:

1. Weak soil permeability;

2. High water table;

3. The number of permanent residents living more than 6 people;

4. A small patch. PRINCIPLE The septic tank (biofilter): after-treatment technology involves the use of free-floating and attached to the textile frames aquatic organisms in which there are numerous colonies of aerobic bacteria. Priority oxidation and reduction processes, the fine aeration and aerobic-anaerobic stabilization excess ila- all these processes provide high-stage treatment of sewage to 98%. Septic aerobic post-treatment "SAD" has the same outer structure as septic pretreatment, but the internal construction is more differentiated from the standpoint of process solutions. tank inside the device are designed to provide optimum performance of the biofilter. Septic tanks are made of high density polyethylene by rotational molding technology, according to standard PN EN 1825-2: 2002 (U) corresponds to the international quality certificate ISO 9001. material- copolymer of a linear medium density polyethylene with close molecular decomposition. The product has good resistance to impact, great views of the inner and outer surfaces and resistance to ultraviolet radiation. The quality of wastewater will be high if: 1. The daily amount of waste does not exceed the level required by the project; 2. The quality of "raw" waste does not exceed the values ​​adopted in the project; 3. The system has been installed correctly; 4. Operation of the treatment plant takes place according to the manufacturer's recommendations.

Product Details

Format, mm

You might also like

Product added to wishlist
Product added to compare.